코엔원

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Door Handle Replacement

Door handles seem like an insignificant thing, but if you dislike the appearance of the handles or find them difficult to use, it's worth replacing them. With some patience, you can put in a new handle in no time.

Most modern door handles have cover plates that conceal the screws for an attractive appearance. However, you'll have to attach them separately if your new handle does not have them attached already.

Remove the old handle

Door handles are not only an important aesthetic addition to your home, but they're also crucial for safety as they allow you to lock and unlock your door. As time passes the upvc door handle replacement handle can start to lose its grip or feel a bit loose. It may also begin to look worn out and old. This is a good indication that it's time to replace the door handle.

If your door handle is becoming difficult to use, it could be time to replace it. This is a serious issue because you won't be able to lock or unlock the door which could put your family and yourself at risk.

Another reason to replace your door handle is if it's damaged or broken. A broken door handle can be quite dangerous, especially when your children or elderly family members are unable to open it, and get trapped within. It's easy to replace a damaged handle on the door.

The majority of modern door handles are standard size, so they are suitable for any door. If you're not sure whether the new door handle you're buying will work, try removing the old one and measuring its housing holes. This will enable you to buy the right size door handle.

It is easiest to remove the old door handle by unscrewing it from the door. Usually, a screwdriver is used. Some door handles come with the cover plate, which conceals the mounting screws. You will need to remove the cover plate to gain access to the screws. After you have removed the handle that was previously used, take note of the way the spindle has been connected. This will aid in aligning the new handle.

You can also remove the door handle by unscrewing the latch mechanism. This is typically done with a screwdriver but you'll need to locate the small latch, which is located at the edge of the trim piece. After taking off the latch, remove the handle and strike plate. Then remove the latch from the door's edge.

Remove the Strike Plate

When you replace your handle, you'll also want to replace the latch plate, which is the hole which the door's latch hooks into when it closes. The package the new handles come with will offer two different latch plates: either a rectangular or a circular one (see the diagram above for the parts of the door handle). If your current latch plate has a rectangular shape, switch it over to the round one, so that the latch hooks onto the strike plate in a manner that makes the handle easier to use.

The first step is to remove the screw that holds the latch plate in place. These screws can be quite tight, and will require some force to loosen. If you can, it might be helpful to have another person assist with this part.

After the screws have been removed, the latch plate will slide out types of window handles the door handle replacements easily. If the latch plate is stuck or won't move, use a small file to scrape the edges. This will sometimes free the plate up.

Now you can move on to making the new door strike plate to be installed. Screw the latch plate into the door jamb using the screws that came with your new handles. Do not tighten the screws too much as this could damage the strike plate.

If you're unsure if the latch plate is in the right position Try closing and opening the door to see if it closes and latches correctly. If not you'll need to adjust the strike plate up or down, or move it forward or back until the door shuts and latches correctly.

If the door is moving or jiggling, you may need to enlarge the hole for latching in the strike plate. This is more common with older doors, but could be due to wear and tear, hinge mortises that are too narrow or the wrong size for the latch, or due to a broken or damaged strike plate. If this is the situation, use a metal filing instead of a chisel, or hammer to adjust the strike plate.

Removing the Latch

The latch is the angled piece of metal that moves through the hole in the inner edge of your door. The latch is pushed forward when you turn the handle. It also hooks into an opening in the door frame to keep the door shut. If your door shakes when you close it, changing the latch may be all you need to fix it.

It's difficult to see the screws that hold the latch to the door, however there's usually a small slot on the trim plate that allows you to insert a screwdriver into the slot and pry it off. After removing the trim plate, you should be able to take off the latch, as well as the bolts that hold it and the spindle that holds it.

If the latch won't come out, try using an old-fashioned paper clip or tool to spring it loose from the handle mechanism. Insert the item into the slot for the latch that is recessed, and gently twist it or jiggle until you feel that the latch and handle begin to break off. It is possible to repeat this process several times before you can remove the latch.

You should be able slide the new latch into its slot without any problems after you have removed the old one. Use the new screws to secure the latch to the strike plate or door frame. Make sure it's correctly positioned in the slot and aligned with the screw chambers.

Check the backset of the current handle (the distance between the center of the large hole on the victorian scroll door handles's front and the edge) prior to installing the new handle. Check that the latch size of the new handle is in line with the measurement.

You'll require a brand new cylinder for your lock if replacing the latch and handle or if your current one is damaged. If you're not changing locks, however, a new latch will fit in your existing recess and will be compatible with your current keys. Make sure you select an entry point with rectangular cover plates that match the handles you have.

Removal of the Cover Plate

Door handles may begin to look shabby over time However, if you replace them with a modern lever-on-rose designs, it's a quick and easy DIY project and decorating idea that will improve the overall look of your home. You can buy complete sets of door handles that come with matching escutcheons as well as privacy adaptor kits.

To replace an internal door handle, remove the cover plate (or rose), which covers the screws and inner mechanism. Find an opening tab on the plate and make use of a flathead screwdriver to remove it from the knob. It may have an opening along one side or be held in place by a pin.

Remove the screw that holds the interior handle and put it aside after the cover plate has been removed. Take off the screws that hold both the inner and outer plates. You can loosen them with the help of a Philips Screwdriver. Then, take the inner plates and latch plate from the door and set them aside.

Most doors have gaps between the door jamb and the edge of the frame, which allows for a handle, however not all do. If yours doesn't then you'll have to drill a hole into the door for the new handle. The procedure to do this is similar to the procedure for opening a door with locks, but you'll need to take extra care not to damage the door or frame.

After the holes are drilled after which you'll have to put in new door knob screws. Purchase the same dimensions as your old screws to prevent getting the handle too tight or loose. Installing a new latch and strike rod is also required. These aren't included in most door handle sets.

Amazon's Choice FAERSI 2-piece chrome finish handle sets are a great alternative if you're in search of a premium interior door handle replacement set. It's a factory-fit product and has been praised with hundreds of five-star reviews. It's a great option to replace damaged or worn door handle hardware inside your Chevy HHR.