코엔원

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to go in and out at their own pace, without needing to let them in or out. They also help stop your cat from urinating in the house.

Installing a cat flap into a upvc door panel is a lot easier than glass doors, however it does require some skills and the proper tools.

Take a measurement of the door

Installing a cat flap on the door can be a challenge however, as long as you choose the right type of cat flap be patient and follow the directions provided, it shouldn't be too much trouble. We will demonstrate how to draw the shape and then use the jigsaw to cut out the door area. Then we will finish the job by attaching the cat flap. This will ensure the flap is in place and shields the doors from damage caused by rain and wind.

To determine the size of the cat flap you need, measure the width of your pet. This will allow you to choose a cat flap that is large enough for your pet to walk into the home and exit without needing to open the door every time.

Once you have the measurements, you can mark out where on the back door with cat flap fitted the template should be placed, usually this is done with an X, but some kits come with a drawing that shows the location to drill, if you have one, then attach it to the door and use a pencil to draw around it. If your door has moulding or sill on the bottom edge of it ensure that you have enough space because this will keep your cat safe and stop them from gaining access to your home.

Use a set square to check that you're cutting properly and to ensure the hole is in a rectangle shape. When you are satisfied with the result, you can start removing the rest of the door material. If you have a set square then make use of it to verify that you're cutting properly and to make sure the hole is a proper rectangular shape. Once you are satisfied with this you can begin to take off the rest of the door material.

Draw a Line

The cat flap is a great way to let your pet out and in without worrying about them coming in with visitors or leaving unwelcome gifts in the home. It also stops draughts and helps keep your home's temperature in check. However, fitting cat flap In upvc door panel the cat flap to your door might seem like an intimidating task for those who've never done it before, leading many people to call a professional joiner or carpenter to complete the task. This is an option but you can do it yourself if the tools are right and the instructions are adhered to.

While this is far simpler with a wooden door, it is still possible in uPVC doors, but you should be careful not to scratch the doors, as this can cause damage to the warranty. First, you need to examine the door's measurements to ensure it will accommodate the new cat-flap. If you have an ordinary upvc door panel with cat flap fitted panel it's easy. However, if your door is composite or a different type of door, you may need to be more careful.

The next step is to determine the height of your cat's belly. This is the amount of height between the floor and the underside of your cat's stomach. It is important to locate an area on the door that will allow your pet to pass through comfortably. Once you've got the information you'll have to mark the area with a spirit-level and a pencil, so that you are sure that the hole will fit your cat.

After you've marked the area, it's now time to cut the hole. It is important to be patient and use a jigsaw ensure the cuts are clean and smooth not uneven and rough. This could damage your door. You should also remember to wear safety glasses and a dust mask when working with the jigsaw as inhaling the sawdust can be dangerous to your health. After you have finished cutting the hole, you'll need sandpaper to smooth the edges so that the cat flap is easily inserted into the hole.

Cut a hole

It can be a challenge to install the cat flap onto a door panel or a sealed double glazing unit. If you're not skilled in DIY, it is recommended to hire a professional to do the job for you. A botched job could not only look ugly, but also pose security risks. It could let cold air to enter when the cat is outdoors and hot air out when inside.

The hole's location should be marked on the door using a pencil and spirit level. This will ensure that it is correctly positioned and aligns with the rest of the door. Make sure you have sandpaper in your possession to smooth out any rough edges.

Wear any safety equipment you need to work with an electric tool. If you are worried about the sound of a jigsaw you can buy one that is cordless, which is quieter and more user-friendly to use.

You should only remove the material required to fit the flap. It is necessary to leave some extra material to make the wall thickness of the cat flap. However, removing too much can cause issues or even damage the door frame.

A upvc door may have a metal frame or panel within it that will interfere with the microchip cat flap if this is the case, you'll need to cut an oversize hole so that the metal does not touch the the cat flap in bifold doors flap. If this is the case, it is essential to fill in the gap and make it watertight.

If you're looking to install a cat flap in a double-glazed or upvc window with frames made of metal you'll need to talk to a specialist. They will offer you a brand new piece of glass with the hole that is already designed for the cat flap. It is much less expensive to do this than to attempt to fix the flap to an existing pane of glass that hasn't been designed specifically for the purpose.

Install the Flap

Cat flaps allow your pet to leave and come at their own pace, giving them the freedom to relax inside the house whenever they're feeling like it. However, if you own an upvc door panels cat flap door, it may be difficult to install a cat flap, especially in the absence of a glass pane that can be cut to accommodate one. If you are willing to install a half-glazed uPVC replacement panel, it's possible to add an additional cat flap. It's not as simple as just cutting a hole through the door, however there are a few things you'll need first to ensure that it's secure.

A composite door panel usually has an extremely thin plastic outer skin that is bonded to a soft, polystyrene insulating core. The material is quite fragile and care should be taken when cutting through it to avoid causing damage. This type of door usually includes a template that you can use as a reference to cut the hole in your door.

Once you have marked the position of the hole in your door, it's now time to install the flap itself. You can buy and fit a wide variety of different models including basic push-button operated ones to microchip-activated ones that only let in your pet. Whatever kind of cat flaps you choose, it's vital that your cat can utilize the flap with ease without getting caught in bad weather.

A circular fitting is more effective than a square one, as circles can be cut more securely into the glass. This is because square holes are more likely to break the glass when they are drilled. It's also a much safer option as you're not at risk of drilling into toughened glass that could shatter and injure your pet or your family. This is particularly important if you have a young or elderly person at home who could be injured by shards glass.