코엔원

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your cat go inside and out whenever they want without having to let them in or out. They can also help prevent your cat from toileting inside the house.

It is much easier to put an animal flap on a upvc panel than a glass one, but you will need some skills and the right tools.

Measure the Door

Installing a cat door into a front door can be difficult however, provided that the cat flap is of the right type and you follow the directions, it shouldn't be too difficult. We will help you mark the shape and use a jigsaw in order to cut out the door area. Then we'll complete the job by affixing the flap. This will ensure that the flap remains in place and shields the doors from damage caused by rain and wind.

To determine the size of the cat flap you need, measure your pet's width. This will ensure that the flap is big enough to allow your pet to enter and leave the house without having to open and close the door each time, yet small enough to stop the pet from straying too far in either direction.

Once you have the measurements, you can determine the area on the door where the template should be placed, usually this is done with an X. However, some kits include a drawing that shows the location to drill, if yours does then stick it to the door and draw a line around it. If your door has a moulding or sill on the bottom edge of it then make sure you have enough space as this will ensure your cat flap in bifold doors's safety and stop them from gaining access to your home.

Next put on your eye protection as well as a dust mask. Then using a jigsaw, begin cutting according to the lines you've drawn in. Don't press the blade too hard, as this can make it cut faster than you would like it to. If you have a square that you have cut, use it to check whether you're cutting in the right way and to ensure that the hole is in a rectangular shape. Once you are satisfied with this you can begin to take off the remaining door material.

Draw a Line

The cat flap allows you to let your pet inside and outside without worrying about unwanted visitors or unwelcome gifts. It also stops draughts and helps to keep the temperature inside your home stable. The installation of a cat flap your door might seem difficult for those who haven't attempted it before. Many people will call a professional carpenter or joiner to complete the job. This is a viable option, however you can do it yourself if your tools are appropriate and the instructions are adhered to.

Although this is much easier to do with a wooden door, it is still feasible in uPVC doors, but you must be cautious not to damage the doors, as this can cause damage to the warranty. The first step is to measure the door and ensure that it can accommodate the new cat flap fitters flap. If you have an ordinary uPVC panel it's easy. However when your door is composite or a different type of door, you might require more care.

The next step is to determine the height of your belly for your cat. This is the height from the floor to the underside of the cat's stomach and you will need to find a place on the door that will be within the range your cat flap bifold doors can comfortably pass through. Once you know this then you be required to mark the area with an eraser and a spirit level so that you can be sure that the hole you make will be a good fit for your cat.

After you have marked the area, it's time to make the hole. You will need to use the jigsaw, and it is important that you take your time in order to ensure that the cuts are clean and smooth, rather than uneven and rough, as it could cause damage to your door. Wear safety glasses and a dust mask while using a jigsaw. Inhaling sawdust can be harmful for your health. Once you have completed the cutting, you'll have to smooth out the edges of the hole with sandpaper, so that the cat flap can be fitted easily in place.

Make a hole

It isn't easy to fit the cat flap onto a door panel or a sealed double glazing unit. If you're not experienced in DIY, it's best to employ a professional to do the work for you. A mistake in the process may not only be unsightly but also an enigma for security as well as allowing cold air to enter when the cat is outside, and hot air to escape once inside.

Mark the hole position on the door using an eraser and a spirit level. This will ensure that it is correctly positioned and is flush with the door's other parts. It is important to have a piece of sandpaper at hand for any rough edges.

After the line is drawn, you can cut the hole using a jigsaw. Be sure to wear any necessary safety gear for working with the power tool. If you're worried about the noise, you can buy an electric jigsaw that is quieter and more user-friendly.

It is essential to only remove the material required to make the cat flap. A little bit of extra material will be needed to cover the thickness of the the cat flap itself but removing more than that can cause problems and even damage the doors frame.

A door made of upvc could have a metal frame or panel that could interfere with the microchip cat flap and in this case you'll need to cut an over-sized hole to ensure that the metal does not touch the wall of the cat flap in upvc door cost flap, if this is the case, it is essential to fill in the oversize gap and seal it with water.

If you want to install a cat flap into windows made of double-glazed or upvc with metal frames it is necessary to speak with an expert. They can provide you with a brand new piece of glass that has the hole already pre-made for the cat flap. It is cheaper to have this done instead of trying to install the cat flap onto an existing pane of glass that hasn't been designed specifically for this purpose.

Install the Flap

Cat flaps allow your pet to come and go as they please, giving them the ability to unwind in the home whenever they're feeling like it. If you have an upvc door panels cat flap front door, it can be difficult to put in a cat flap. This is especially true when you don't have an glass panel that is cut. If you're able to buy and install a half-glazed replacement uPVC panel, then it's possible to fit an animal flap onto these doors. It's not as simple as just cutting a hole through the door though and there are a few things you'll need first to make sure it's secure.

A composite, uPVC or GRP door panel is generally comprised of a thin plastic skin that is bonded to an insulating polystyrene base. It is crucial to be cautious when cutting the material. This type door has a template you can use to cut the hole.

Once you have marked the location of the hole in your door, now it's time to put in the cat flap. You can pick from a range of models, ranging from simple push-button models to microchip-activated ones that allow only your pet to enter. Whatever kind of Cat flap in upvc Door panel flaps you select, it's vital that your cat is able to utilize the flap with ease without getting stuck in the rain.

A circular fitting is better than a square, because circles can be cut more securely into glass. It's because square holes are more likely to crack the glass when drilled. This is also a safer option because you won't need to drill into the toughened glass, which could shatter and harm your pet or family members. This is especially important if there are children or elderly people in your home that could be injured by glass shards.