코엔원

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to leave and come whenever they want, without you needing to let him in or out. They also can help to prevent your cat from toileting inside the house.

Installing a cat flap into the door panel made of upvc is much easier than in glass doors, however it requires some knowledge and the right tools.

Measure the Door

The installation of a cat flap inside the door isn't easy but if you select the right kind of cat flap, take your time and follow the steps provided it shouldn't be too much trouble. We will help you draw the shape and then use a jigsaw in order to cut out the door area. Then, we'll finish the job by attaching the cat flap. This will ensure that the flap remains in place and protects the door from wind and rain causing damage.

The first step is take a measurement of the width of your pet to get an accurate measurement of what size of cat flap you'll require. This will allow you to choose a cat flap that is large enough to allow your pet to walk into the home and exit without needing to open the door every time.

If your kit comes with an illustration of the location to drill then you can place it on the door and then use a pencil around it. If your door has a sill or moulding on the bottom edge then make sure you have clearance from these because this will ensure your cat's safety and prevent them gaining access to your home.

Put on your eye protection and dust mask, and using a jigsaw, begin cutting according to the lines you penciled in. Don't push the blade too hard, as this can make it cut faster than you want it to. Set the square with a ruler to ensure that you're cutting the material in a proper manner and that the cut is a rectangle shape. Once you are satisfied with the result, you can take out the rest of the door material.

Draw a Line

The Cat Flap In Upvc Door Panel flap lets you to let your pet inside and out without worrying about unwanted visitors or unwelcome gifts. It also helps prevent draughts and keeps your home's temperature stable. However, putting the cat flap to your door could be an overwhelming task for those who have never done it before. This can lead many to hire a professional carpenter or joiner to do the job. This is a viable option, however you can do it yourself if the tools are right and the steps are followed.

Although this is much simpler when using a timber door it is still feasible in uPVC doors, but you should be careful to avoid damaging the doors since this could cause damage to the warranty. The first step is to take measurements of the door, making sure that it can fit the new cat flap. If you have an ordinary uPVC panel, this should be easy. However, if your door is composite or a different type of door, you may have to be more cautious.

The next step is to determine the belly height of your cat. This is the distance from the floor to the lower part of the cat's stomach and you will need to find a spot on the door where this measurement will fall within the range that your cat is able to comfortably walk through. Once you have the information you'll have to mark the area with a spirit level and a pencil so you are certain that the hole will be suitable for your cat.

Once you have marked out the area, it is time to cut the hole. You will require a jigsaw and it is crucial to be patient to ensure that the cuts are clean and smooth rather than uneven and rough, since this could damage your door. Wear safety glasses and a dust mask when working with the Jigsaw. Inhaling sawdust can be harmful for your health. After you've completed the cutting, you will need to smooth out the edges of the hole with sandpaper so that your cat flap can be fitted easily.

Make a hole

It can be difficult to put an animal flap on a door panel or sealed double glazing unit. If you're not experienced in DIY, it's best to employ an expert to do the job for you. A mistake in the process may not only look ugly, but it could also be a security risk as well as allowing cold air to enter when the cat is outside, and hot air to escape once inside.

The hole's location should be marked on the door using an eraser and a spirit level. This will ensure it is properly positioned and aligns with the rest of the door. Make sure you have some sandpaper on ready to smooth out any rough edges.

After the line is marked you should cut out the hole using a jigsaw, remember to wear any necessary safety equipment when working with a power tool. If you are worried about the sound produced by a jigsaw you can buy a cordless version which is quieter and simpler to use.

It is best to only remove the material that is required to fit the flap. It is essential to leave a bit of material to make the wall thickness of the cat flap. However cutting off too much material can cause problems or even damage the door frame.

If the door is made of upvc and is made of metal, or has a frame, it could interfere with the microchip flap. In this scenario you'll need make an oversize hole to ensure that the metal doesn't get in contact with the wall of the flap.

If you're planning to install a cat flap cover for winter flap inside a double-glazed or upvc window with frames made of metal it is necessary to speak with an expert. They can provide you with a new piece of glass that has the hole already pre-made for the cat flap. It will be much cheaper to get this done rather instead of trying to install the cat flap onto an existing pane of glass cat flap installation near me that has not been manufactured specifically for the purpose.

Install the Flap

Cat flaps allow your pet the freedom to come and go whenever they want and allow them to be comfortable at home whenever they like. However, if you own an uPVC door, it may be difficult to put in an animal flap, especially if you don't own a glass pane that can be cut for one. Luckily, if you're happy to buy and install a half-glazed replacement uPVC panel, then it's possible to add an animal flap onto these doors. It's not as simple as just cutting a hole in the door though and there are a few things you'll need to do first to make sure it's safe.

A composite, uPVC, or GRP door panel typically comprises an extremely thin plastic outer skin joined to a soft polystyrene insulating core. The material is extremely fragile and care must be taken when cutting into it to avoid damaging. This kind door has a template can be used to cut the hole.

Once you have marked the position of the hole in your door, it's time to fit the cat flap. You can buy and fit many different models, from basic push-button operated models to ones that are activated by microchips that allow only your pet. Whatever type of cat flap you pick it is essential that your cat is able to use the flap comfortably without getting stuck outside in the rain.

It's a good idea choose a circular fitting rather than a square one, as circles are more securely cut into door glass. This is because square holes make the glass more susceptible to cracking if drilling is applied to it. It's also a much safer choice to use since you don't risk drilling into toughened glass that may break and hurt your pet or family members. This is particularly important if you have child or elderly person in your home who may be injured by shards of glass.