코엔원

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your cat flap installer go inside and out at their own pace, without needing to let them in or out. They also can help stop your cat from urinating inside the house.

It is easier to install the cat flap on a Upvc panel than one made of glass however, you'll require some knowledge and appropriate tools.

Measure the Door

Installing a cat flap on the door isn't easy but as long as you use the correct type of cat flap, take your time and follow the steps provided it should not prove to be too much trouble. We will show how to trace the shape, use an jigsaw for cutting out the door's area and then complete the job by securing the flap to the door. This will ensure the flap stays in position and protects the doors from the damage caused by wind and rain.

The first step is determine the width of your pet to get an accurate measurement of the size of cat flap you'll need. This will allow you to select a cat flap that is large enough for your pet to walk into the home and exit without having to open the door each time.

Once you have the measurements you can mark the location on the door where the template should be placed. usually, this is done using an X, however some kits include drawings that show the location to drill, if yours does then stick it to the door and draw a line around it. If your door has a sill or moulding along the bottom of it ensure that you have enough space as this will ensure your cat's safety and prevent them gaining access to your home.

Put on your eye protection as well as a dust mask, and using a jigsaw, begin to cut along the line that you penciled in. Don't push the blade too hard as this could cause it to cut faster than you'd like it to. If you own an already-cut square, use it to ensure whether you're cutting in the right way and to make sure the hole is a good rectangle. Once you are satisfied with this you can start to remove the rest of the door material.

Draw a Line

The cat flap lets you to let your pet go inside and outside without worrying about unwanted visitors or unwelcome gifts. It also stops draughts and helps keep your home's temperature stable. However, putting the cat flap to your door could be an overwhelming task for those who haven't done it before. This can lead many to hire a professional joiner or carpenter to do the job. While this is certainly an option, it is possible to do the work yourself if you have the proper tools and follow instructions with care.

While this is far simpler when using a timber door it is still possible to do this in uPVC doors, though you need to be very cautious not to damage the doors as this will cause damage to the warranty. First, you must examine the door's measurements to ensure it will accommodate the new cat-flap. If you have a standard uPVC panel, this should be easy. However, if your door is composite or another type of door, you may have to be more cautious.

Next, you will need to determine the belly height of your cat. This is the measurement from the floor to the lower part of the cat's stomach and you'll need find a place in the door where this measurement will fall within the range that your cat is able to comfortably walk through. Once you have this information, you will need to mark out the area using pencil and a spirit level so that you can be sure that the hole you make will be suitable for your cat.

Once you have marked out the area, it is time to make the hole. It is crucial to be patient and use a jigsaw ensure that the cuts are clean and smooth not rough and uneven. This could cause damage to your door. Wear safety glasses and a dust mask when using the Jigsaw. Inhaling sawdust is hazardous for your health. After you have finished cutting the hole, you'll require sandpaper for smoothing the edges so that the cat flap is easily fitted into place.

Cut a Hole

Installing a cat flap to an existing door panel or double glazing sealed unit is quite difficult. You might be tempted to do it yourself, but unless have a lot of expertise in DIY, it's probably best to get a professional in to do the job for you. A shoddy job might not just be ugly, but it could also be a security risk as well as allowing cold air to enter when the cat is outside, and hot air to escape when inside.

Mark the hole position on the door with the help of a pencil and a spirit level. This will ensure that it is correctly positioned and is flush with the door's other parts. It is important to have some sandpaper on hand to smooth out any rough edges.

After the line is traced, you must cut the hole with the jigsaw. Remember to wear the appropriate safety gear for working with a power tool. If you are worried about the sound produced by a jigsaw you can buy one that is cordless, which is quieter and simpler to use.

It is best to only remove the material needed to make the flap. A small amount of material will be needed to cover the thickness of the wall of the flap, but removing more than that can cause problems and even harm the frame of the door.

A door made of upvc could contain a metal frame or panel which could block the microchip cat flap, and if this is the case you will need to cut an oversize hole to ensure the metal doesn't touch the the cat flap. If this is done, it is essential to fill in the gap and seal it with water.

If you're planning to install a cat flap into a double-glazed or upvc window with frames made of metal, you'll need to consult an expert. They will provide you with a brand new piece of glass with the hole that is already designed for the cat flap installation cost flap. This is less expensive than trying to fit a cat flap inside an existing pane of glass that was not designed for this purpose.

Install the Flap

Cat flaps let your pet leave and come whenever they want, allowing them the freedom to lounge inside the house whenever they feel like it. If you've got an uPVC door it can be difficult to install an animal flap, especially when you don't have glass panes that could be cut to fit one. If you are willing to install a half-glazed uPVC replacement panel, it's possible to add an additional cat flap in upvc door panel with cat flap fitted door panel (apk.tw) flap. It's not a simple matter of cutting an opening in the door. It is also necessary to perform a few steps to ensure it's secure.

A composite door panel is typically made up of an extremely thin plastic outer skin joined to a soft polystyrene insulating core. It is essential to be cautious when cutting the material. This type of door usually comes with a template drawing which you can use as a guide for cutting the hole in the door.

Once you have marked the position of the hole in your door, now it's time to put in the cat flap itself. You can pick from a wide range of models, ranging from simple push-button flaps to ones that are microchip-activated and allow only your pet to enter. Whatever type of cat flap cost flap you pick, it's vital that your cat can utilize the flap with ease without getting stuck outside in bad weather.

A circular fitting a cat flap is superior than a square, because circles can be cut more securely into glass. This is because square holes make glass more vulnerable to cracking if drills are used on it. This is also a safer choice, as you won't have to drill into the toughened glass that could break and hurt your pet or family members. This is particularly important if there are elderly or children in your home who could be hurt by glass fragments.